| Topic Review (Newest First) |
| 02-17-2010 07:44 PM | |
| rrawtry |
Re: Race Riot Build- Best In the Desert Update on The Riot Build: 1. Have my TireBalls in Hand for mounting this weekend. 2. TEAM INDUSTRIES HAS A CLUTCH DESIGNED JUST FOR US REDLINE FOLKS!! I'm ordering mine tomorrow!! 3. The Queen Racing engine is installed and runs like a scalded ass ape!! No HP numbers as the engine dyno broke, but had enough back pressure to blow a season old Big Gun Muffler apart. No fault of Big Gun!! The heat generated while tuning the engine wasn't good for it!! Probably a hair over 100 HP. The clutches were really off when that HP was applied as stated in 2 above. 4. Full FK Heims in hand and going on this weekend. 5. ViPec ECU worth every penny of that near 3 grand!! |
| 01-21-2010 12:29 PM | |
| Dude |
Re: Race Riot Build- Best In the Desert Congradulations on the tire ball sponsership. I have noticed that most desert racers run 12in tires. My brother said that he would look at his post race pictures and check the tire sidewall in the pictures and adjust his tire pressure until he stopped seeing rollover. He ended up at 15 psi with 12in BigHorns. The air filter location looks like water or lots of silt may cause problems. I have run Outerwears and K&N's and they work great but mounted down so low may be an issue. Thanks for the frame information. |
| 01-20-2010 09:41 PM | |
| rrawtry |
Re: Race Riot Build- Best In the Desert 4-5 lbs per tire weight increase. Should normally set up as standard tire pressure!! |
| 01-20-2010 09:33 PM | |
| offroadpro4 |
Re: Race Riot Build- Best In the Desert nice........ so is there a weight/psi difference in the tires when you use tireballs? |
| 01-20-2010 09:25 PM | |
| rrawtry |
Re: Race Riot Build- Best In the Desert I am proud to announce that Tire Balls is now a sponsor of the # 1945 O.L.D. Racing Redline Riot!! We're coming for ya now!! |
| 01-13-2010 08:25 PM | |
| Bear Foot |
Re: Race Riot Build- Best In the Desert I read about those a few years back, but I haven't seen them for sale anywhere. Looked like it would work. |
| 01-13-2010 07:12 PM | |
| rrawtry |
Re: Race Riot Build- Best In the Desert I've looked into it SC but haven't found any real info on it. Not even on the GBC website. Do you have any links? |
| 01-13-2010 06:47 PM | |
| sc revolt |
Re: Race Riot Build- Best In the Desert Has anyone used those foam inserts from GBC? |
| 01-13-2010 03:36 PM | |
| Bear Foot |
Re: Race Riot Build- Best In the Desert Quote:
Originally Posted by rrawtry
View Post
My understanding is that there were two different frames at first, one shorter and one longer. I have the longer one and the 26" fit fine with no rubbing. You might try the 1" wheel spacer as a sollution as it sounds like you have the shorter version 1 configuration. The lug pattern is the same as the Polaris RZR 4/156.
Yeah, I use a K&N with a filter wrap right to the throttle body..... I run 12 psi as I was fearful (justifiably in hindsight) of airing down and having sidewall roll expose my sidewall to puncturing.... High tire pressure will make the suspension work harder. But I guess that beats bent rims. |
| 01-13-2010 02:59 PM | |
| rrawtry |
Re: Race Riot Build- Best In the Desert Just talked to them (Tire Balls) today!! Should know the results tomorrow.... |
| This thread has more than 10 replies. Click here to review the whole thread. | |
| Posting Rules | |
Your Privacy Choices