| Topic Review (Newest First) |
| 01-20-2012 09:51 PM | |
| Bear Foot |
Re: measurement needed Quote:
Originally Posted by offroadpro4
View Post
make sure to use fuel foam specially designed.. if your are building the tank, might as well put it in there...
Search Results for fuel cell foam - SummitRacing.com EvoMx |
| 01-19-2012 11:41 PM | |
| offroadpro4 |
Re: measurement needed make sure to use fuel foam specially designed.. if your are building the tank, might as well put it in there... Search Results for fuel cell foam - SummitRacing.com http://evomx.com/catalog/product_inf...products_id=33 |
| 01-19-2012 09:14 PM | |
| XRMikey |
Re: measurement needed No,no,no, not at all. We were just making sure all the facts were out there. As for the bladder, it will benefit all users, racing or not. Your going from 43 Lbs (5 gals.) to 86 lbs (10 gals.) A little dodge while side hilling might send you rolling. It's just quite a bit of weight to have licking back & forth. If you do get it figured out & it works great for you. I'm interested to see how you went about it. I'm all for extended range. |
| 01-19-2012 08:32 PM | |
| miker |
Re: measurement needed Yes I know that it has a bladder. but I am not racing and not worried about a bladder in the one that I am going to build.... or fuel slosh just mountains and dune riding. I just need a longer fuel range for the rides that I go on that exceed 50 plus miles. right now I am having to get other people that have RZR's to haul my extra 5 gallons for me, and that sucks they get twice the mileage that I do .... but I have twice the HP that they do,,, I do understand all the racing features built in but like I noted above I am not a racer I hope that you guys understand my point of view I didnt mean to sound like Harmon fuel cells where bad it is that they are way too much for me to spend money on right now also Mike @ RRP did you get the oil change kits finished ??? Thanks Mike |
| 01-19-2012 08:20 PM | |
| Red Rock Powersports |
Re: measurement needed That's too funny Mikey! I guess I crossed the finish line first on that one! LOL |
| 01-19-2012 08:11 PM | |
| XRMikey |
Re: measurement needed You do know that the Harmon fuel cells have a bladder in them right? Fuel foam for baffling as well to heavily reduce fuel slosh. Doh! I was typing at the same time. LOL |
| 01-19-2012 08:08 PM | |
| Red Rock Powersports |
Re: measurement needed There is more to it than what you see. There is a special bladder in it as well as other safety features that account for the cost. The custom "Safety" bladder that fits in the shell is almost two -thirds of the cost alone. |
| 01-19-2012 08:00 PM | |
| miker |
Re: measurement needed Thanks Jeff I have the same drawing but did not see that measurement. I am going to make my own... I cant afford the 1500.00 that Harmon wants for one....... should be able to get it all done for around 150.00 plus make a flat one for under the seat that should hold 2 gallons making the total system around 10 gallons |
| 01-19-2012 07:27 PM | |
| Jeff |
Re: measurement needed I measure it at 15" here is the drawing from Harmon but I dont see the height. 
|
| 01-18-2012 08:51 PM | |
| miker |
measurement needed Hello Could anyone that has a Harmon 7 Gallon fuel cell please give me the measurement ... I need the height that is from the bottom of the tank to the top of the tank.. in front of the seat in the photo it is where the hoses run from the top of the tank to the bottom of the tank any help would be great Thanks |
| Posting Rules | |
Your Privacy Choices