Redline UTV Forums - Redline Riot & Redline Revolt Community

Redline UTV Forums - Redline Riot & Redline Revolt Community (https://www.redlineutvforums.net/forumsIndex.php)
-   Lighting, Stereo, and Electrical (https://www.redlineutvforums.net/lighting-stereo-and-electrical/)
-   -   Electrical (https://www.redlineutvforums.net/lighting-stereo-and-electrical/5427-electrical.html)

Bendigo 10-15-2018 02:58 AM

Electrical
 
I have just got a 2007 revolt and trying to fit up an Autometer 4497 any help would be appreciated.

Pilot 10-31-2018 11:06 AM

Re: Electrical
 
The stock tach wiring has a grey wire that was supposed to be for oil pressure warning light but Redline didn't put a oil pressure sensor on the engine so that doesn't need to be used. There is a white wire with orange or red stringer that is for the water temp warning light. The black wire is ground, the pink wire is ignition 12 volts, the solid white wire is the tach signal. There may also be a yellow light wire also. Some of the Autometer tachs have a 4 cylinder single pulse connection and a 4 cylinder dual pulse setting. Others just have a 4 cylinder setting. Use the single pulse setting or the 4 cylinder setting.

Bendigo 11-15-2018 09:18 PM

Re: Electrical
 
Thanks that confirms its wired ok. 4 cylinder 2 pulse setting still seams to run too high RPM. May have to try and get a single pulse


All times are GMT -7. The time now is 06:41 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

 
For the best viewing experience please update your browser to Google Chrome