Has anyone modified there seat frame? If so, what did you do, any pics to share? The back of my seat pushes aginst the throttle body.

Frank, I was wondering if that huge single throttle body set up was going to be a problem if you needed to move the seat back for more leg room. I was able to move mine back 3" with the dual throttle bodies. You can move the peddles forward. Mine are 1 1/2" forward. The cover comes off the seat frame pretty easy. Its small round steel tubing so you could do some cutting and move things around some for more throttle body room. The other option is to cut the frame behind the cross member in front of the engine and move the engine and gearbox section back. You then have to move the control arm front mounts back and redo the rear upright tubes at the back end of the frame. Major Mayhem's is moved back 6" and there is tons of room. The top shock mounts also have to be moved back. You could put on the Revolt dual throttle bodies and build a new air intake plenum to hook back up to your intercooler. I'd try the least amount of work first and go from there.