New 12" fan kit

**offroadpro4** · #11 (**permalink**) 09-12-2009, 12:18 AM

hey bear foot,
did you get a chance to take those pictures of the gauge?..

**Bear Foot** · #12 (**permalink**) 09-12-2009, 09:02 AM

Here's what I did.
Pm Red Rock Rails, he's working on a kit.

**offroadpro4** · #13 (**permalink**) 09-12-2009, 11:34 AM

nice, thanks.....

rzr · #14 (**permalink**) 09-14-2009, 06:39 AM

hi all
That looks good,,

cherylprall · #15 (**permalink**) 01-14-2010, 10:36 PM

Quote: Originally Posted by four_by_nut

You have a temp gauge? Did you add it? And if so, what/how did you do it?

Thanks. If you haven't posted it already, maybe post up a seperate how to?

Dear ALL:

We put a tempurature gauge in our RIOT.. an AutoMeter Wtr Temp Gauge (model 4337) . It matches the Speedometer and tach (see picture). I couldn't find a port on the motor to put the sending unit. So, I put a coupling in the radiator hose off the motor. I took the existing coupling out (under the driver's seat) and made a new one out of aluminum tubing and tapped in a fitting for connecting the sending unit. (see coupling pictures). Running about 180 - 190... measures temp of wtr going to the motor from the radiator.

WFO · #16 (**permalink**) 01-15-2010, 11:48 AM

Does everone know that when the revolt came out their were lots of them with the fan on backwards?..everone should check theirs to make sure when they come on their pulling air and the concave part..pitch.. Is scooping the air

**Bear Foot** · #17 (**permalink**) 01-15-2010, 04:23 PM

Looks good cherylprall. I used the same in line sensor setup.
I have 2 of the inline hose adaptors, if anyone wants one. $10

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)